News classification
Contact us
- Add: 上海市宝山区嘉罗公路2823号
- Tel: 021-56390795
- Fax:
- Email: hbxiece@sohu.com
Lift cable - Shanghai Shanghai light cable
Lift cable
Construction hoist frequent use, in the role of the torsional force of the cable under the excessive fatigue and gradual deformation, so the general general rubber cable is difficult to use in the construction of the elevator for a long time. In view of this situation, we developed a professional construction elevator cable, which uses high strength rubber, and special production process.
I developed the elevator professional cable to meet the domestic large-scale lift equipment. With the height of the elevator continues to improve, the requirements for supporting the cable is very different, because during the operation of the lift, the cable will gather a lot of stress when the lift height is more than 120m (traditional elevator for 70m), Cable torsion stress will be greater, the traditional cable for such a lift. Because of the twisting force can not be promptly eliminate or alleviate and frequent fault core, in order to satisfy the demand of the equipment running, prolong the service life of the cable, cable improvement of the original structure, to meet the needs of professional construction elevator industry.
Elevator cable product features:
One bright spot:
Soft, good bending performance, meet the requirements of small radius of curvature of the mechanical wheel
Highlight two:
For a wide range of products: adhesion, adhesion and adhesion is not half, to meet customer requirements and selection of all kinds of models
Highlight three:
The whole structure closely: meet the pulley type construction hoist cage, different requirements of the line
Highlight four:
High safety, continuous core:
Within the warranty period, cable reciprocating operation generally reach 50 thousand above the frequency, the finished cable bending test showed that the cable can withstand continuous reciprocating operation more than 120 thousand times, the conductor broken core.
Lift cable manufacturers preferred Shanghai Shanghai Light Cable Co. Ltd. http://www.shhcdl.com/
I developed the elevator professional cable to meet the domestic large-scale lift equipment. With the height of the elevator continues to improve, the requirements for supporting the cable is very different, because during the operation of the lift, the cable will gather a lot of stress when the lift height is more than 120m (traditional elevator for 70m), Cable torsion stress will be greater, the traditional cable for such a lift. Because of the twisting force can not be promptly eliminate or alleviate and frequent fault core, in order to satisfy the demand of the equipment running, prolong the service life of the cable, cable improvement of the original structure, to meet the needs of professional construction elevator industry.
Elevator cable product features:
One bright spot:
Soft, good bending performance, meet the requirements of small radius of curvature of the mechanical wheel
Highlight two:
For a wide range of products: adhesion, adhesion and adhesion is not half, to meet customer requirements and selection of all kinds of models
Highlight three:
The whole structure closely: meet the pulley type construction hoist cage, different requirements of the line
Highlight four:
High safety, continuous core:
Within the warranty period, cable reciprocating operation generally reach 50 thousand above the frequency, the finished cable bending test showed that the cable can withstand continuous reciprocating operation more than 120 thousand times, the conductor broken core.
Lift cable manufacturers preferred Shanghai Shanghai Light Cable Co. Ltd. http://www.shhcdl.com/